Ga naar de inhoud
Flickerfield

Alle berichten

The engine2 september 2026 · 3 min lezen

Duty cycle, explained

The second number in every flicker session. What 0.1 to 0.9 changes about the light, the timing and what people report, with static diagrams only.

Frequency gets all the attention. Duty cycle is the other number, it is at least as consequential for what you see, and almost no app in this category lets you touch it.

The definition

A flicker cycle has two parts: lit and dark. Duty cycle is the fraction of the cycle that is lit. At 0.5, the light is on for half of each cycle. At 0.2, it is on for a fifth and dark for four fifths. At 0.8, mostly on with a brief gap.

Written as a picture, at 10 Hz, each cycle is 100 ms wide:

0.2   ██░░░░░░░░ ██░░░░░░░░ ██░░░░░░░░   20 ms lit, 80 ms dark
0.5   █████░░░░░ █████░░░░░ █████░░░░░   50 ms lit, 50 ms dark
0.8   ████████░░ ████████░░ ████████░░   80 ms lit, 20 ms dark

The frequency is identical in all three rows. Ten cycles a second, every time. Only the shape of each cycle changes.

What changes when you move it

Total light. A 0.8 duty cycle delivers four times the light energy of 0.2 at the same frequency and brightness. The session feels brighter, and if you are sensitive to brightness, that is the control to reach for before you touch the screen brightness itself.

Edge sharpness. A short lit fraction produces a crisp pulse against a long dark gap: a distinct event, ten times a second. A long lit fraction produces something closer to a light that dips. People tend to describe the first as sharper, more geometric, and the second as softer and more like a glow. These are reports, not measurements, and your own may differ.

Where the energy sits. A square wave is not a pure tone; it contains harmonics, and the duty cycle determines their relative strength. A 0.5 duty cycle suppresses the even harmonics. Narrower or wider pulses put more energy into them. If you have ever wondered why 10 Hz at one duty cycle looks different from 10 Hz at another despite being the same frequency, the harmonic content is a reasonable place to start looking.

Apparent brightness against comfort. Long dark gaps let the eye recover between pulses. Some people find a narrow duty cycle easier to sit with for a long session even though the peak is identical.

What the library does with it

The presets are not all at 0.5, and the variation is deliberate:

  • The starter sessions use a narrow pulse, around 0.35, so the first experience is not an overwhelming amount of light.
  • Long alpha holds tend to sit near 0.5, the neutral choice.
  • The faster material at the top of the band uses narrower pulses, because the light energy at 13 Hz with a wide duty cycle is considerable.
  • Sleep and wind-down ramps combine a low frequency with a dim colour and a moderate duty cycle.

You can change any of it in the builder, within the 0.1–0.9 range. The limits exist because below 0.1 the lit fraction becomes shorter than a display frame at ordinary refresh rates (you would be asking for something the panel cannot draw), and above 0.9 the dark gap collapses and the flicker stops being a flicker.

The thing duty cycle does not change

It does not change the risk. A flicker at 14 Hz with a 0.1 duty cycle is still a flicker at 14 Hz. The accessibility threshold that governs flashing content, three flashes per second and the whole band up to 55 Hz, is defined on the flash rate, not on how long each flash lasts. Narrowing the pulse reduces the amount of light, which is worth doing for comfort, and it does not move anybody from the "must not use this" list to the "may use this" list.

That is also why there is no interactive demo on this site at any duty cycle, and why the only place you will find a running flicker is in the app, behind the safety gate that asks you the exclusion questions first.

How to experiment with it

Change one thing at a time, and write down what you changed. Fix the frequency at 10 Hz and the colour at amber, run three minutes at 0.35, then another day run three minutes at 0.6, and use the session log's mood and notes fields rather than your memory. The reported differences in this literature are between-person differences as much as between-condition ones, so your own comparisons are the only ones that describe you.

Bronnen

  1. Amaya et al. (2023), effect of flicker frequency and rhythmicity, PLOS ONE 18(4): e0284271
  2. Altered states phenomena induced by visual flicker light stimulation, PLOS ONE 16 (2021), e0253779
  3. Understanding SC 2.3.1: Three Flashes or Below Threshold (WCAG 2.1)